B/GUIDED OVOLO 6.0MM RAD

Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
D=24.7 mm
C=12 mm
OL=51 mm
B=9.5 mm
B2=12.7 mm
R=6 mm
Shank Diameter=1/2 inch