B/GUIDED OVOLO 25.4MM RAD

Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
D=63.5 mm
C=32 mm
B=9.5 mm
B=12.7 mm
R=25.4 mm
Shank Diameter=12 mm